Features of iSpa shower head

1. Enjoy having an indoor waterfall in your bathroom.
2. Over 500,000/cc of Anions to keep you alert and productive
3. Collagen treatment with every shower.
4. Vitamin C to pamper and moisturize your skin and hair
5. Non chlorinated water for the whole family
6. Better water conditions with sediments and rust removed
7. Antibacterial protection
8. Absolutely odorless water
9. Water that is soft to the touch
10. Powerful and high pressurized water stream for the perfect massage
11. Lower your bills with water & energy savings

Installation
  1. Remove the old shower head from the shower hose.
  2. Connect the iSpa shower head to the shower hose.
  3. Turn the tap on and ensure there is no water leakage.
* Take caution to not to lose the rubber-ring when installing the product. When the rubber-ring is not equipped with, it might result in water leakages.

How to change the pre-filter?
  1. Remove the shower head by turning the shower head connector in a clockwise direction.
  2. Remove the pre-filter from the inside of the shower head and replace it with a new pre-filter.
  3. Re-connect the shower head by turning it towards the anti-clockwise direction.
* Take caution to not to lose the rubber-ring when installing the product. When the rubber-ring is not equipped, it might result in water leakages.

Filter replacement period

  • The life span of the filter depends on the amount of water used, water pressure and the quality of water.
  • Should the water intensity reduce remarkably, please check the pre-filter When the color of the pre-filter changes to yellow or brown, please replace the filter.

How to wash-off the micro-pored plate?
When the water doesn't flow throught the micro-pored plate thoroughly, please refer the directions as below.
  1. Open the shower head cap
  2. Separate the rubber ring
  3. separate the plate from the shower head cap.
  4. Clear the holes of the plate by using a brush
  5. Assemble the plate into the shower head cap.
  6. Put the rubber ring back to the shower head cap.
  7. Be careful to place the rubber ring correctly
  8. Assemble the cap with the shower head.
Note:
1. To ensure the proper functionality of iSpa shower head, please replace the filter periodically or as and when required.
2. Be sure to use the shower head below the temperature of 70 degree C. Higer temperature may damage the shower head and filters.
3. Read the product manual carefully before using the shower head.
4. Be careful to not to lose the rubber ring when you dissemble the product to replace the filter.
*When the rubber-ring is not equipped with, it might result in water leakages.

Contact Us

14 Arumugam Road #08-03, Lion Building 'C' Singapore 409959 Tel: +65 67457933 Fax: +65 67454933

GO TO HEMSCO HOME PAGE.

Micro-pored shower plate is equipped with,

Micro-pored shower head plate.
  • Emission of anions caused by the 'Lenard Effect'.
  • Micro pores help to break up the water molecules, similar to the effects of a waterfall or fountain.
  • It creates a huge number of naturally produced anions (over 500,000/cc).
  • Maximizes the effect of skin massage through the minimization of water molecules.
  • Moisturizes the skin by enhanced penetration of micro-water molecule into the skin.

Lenard Effect

  • The 'Lenard Effect' also known as the 'Spray Electrification' or the 'Waterfall Effect'.
  • The disturbances of the water molecules occasionally displaces an electron, causing it to break off from its host. This spare electron then seeks out another oxygen molecule as a host, giving this molecule an extra electron, and therefore creates a negative charge.
  • This usually occurs due to friction between water surfaces or colliding water particles as observed in nature's waterfalls.

Water filter is equipped with,

  • Floating impurities filter.
  • The water-filter eliminates prevents floating substances (such as sediments, rust & sand) from travelling to the shower plate and thus creating a blockage at the micro-pores.

Functional compound ceramic filter is equipped with,

Functional compound ceramic filter.
  • The effects of surface activity results in smoother & soften water.
  • It helps users to recover from fatigue and improves metabolism as a result of the emission of far-infrared rays.
*Antibacterial function. *Deodorization function.
Infinite replacement period. (The ceramic filter can be used permanently.)

Name of parts.

Ads:
www.FastAdPost.com - The fastest ad posting service www.advertigo.net - Advertise anything free - classified ads from around the world ADVERTIGO.NET - Advertise anything free classified ads from around the world